Research projects & supervision summary

Project Opportunities

Title: Dynamic effects in soil (A) - Rapid penetration of objects into clays.

Summary of opportunity:

The objective of this project is to perform a series of experiments to improve our understanding of rate effects in clays.

Opportunity synopsis:

The project will concentrate on free falling penetrometers, which are used in offshore site investigation, and have been proposed for remote site (e.g. lunar) investigation. To provide reliable interpretation of soil strength and stiffness greater understanding of the effects of high rates of loading on the soil response are needed. This will be achieved by an experimental parametric study of the penetration tests and associated element tests performed at high strain rates. Results of experiments will be compared with the predictions of dynamic, large displacement finite element analysis.

--------------------------------------------------

Project Opportunities

Title: Dynamic effects in soil (B) - Dynamic compaction

Summary of opportunity:

The aim of this project is to provide new experimental data of the mechanics of the compaction process using photographic techniques and other instrumentation.

Opportunity synopsis:

Dynamic compaction is a widely used soil improvement technique that involves the dropping of large weights onto the soil, or the towing of “square” rolling compactors. The success of dynamic compaction depends on soil type, moisture content, compaction energy, but the depth and extent of the soil improvement is often difficult to predict. Results of experiments will be compared with the predictions of dynamic, large displacement finite element analysis.

--------------------------------------------------

Project Opportunities

Title: Hydro-mechanical effects associated with geo-sequestration of CO2 in coal

Summary of opportunity:

The aim of this project is to perform tests to explore the ease with which CO2 flows through coal, and how this may change as adsorbtion occurs, and to investigate the resulting change in mechanical strength and stiffness.

Opportunity synopsis:

Australia relies heavily on coal for power generation. To meet concerns of climate change and reduce CO2 emissions to the atmosphere it is proposed to pump CO2 back into the ground into deep unmineable coal deposits. Coal is attractive as a repositry because it has the capacity to adsorb relatively large amounts of CO2. Studies have suggested that the coal may swell and soften as it adsorbs CO2 and if so this would have significant consequences on the safety and economic viability of using coal as the storage medium. Experiments will provide input into numerical models which will be developed to describe the CO2 transport.

--------------------------------------------------

Project Opportunities

Title: Studies of interface behaviour between soil and particulate materials and solids

Summary of opportunity:

This project involves the study of interface behaviour between soil and particulate materials and solids.

Opportunity synopsis:

A unique large, 1 metre diameter, ring shear apparatus has been developed at the University of Sydney to investigate interface behaviour. Recent theoretical developments have highlighted the role of particle crushing in the mechanical response, and this is particularly relevant for shearing adjacent to interfaces. The large ring shear device is an ideal apparatus for investigating the crushing behaviour as it enables the interface to be subjected to very large displacements. The project will involve modification to the apparatus to allow visualisation of the soil and a series of tests with different soils and particulate materials. This will enable the evolution of particle grading and crushing to be quantified and the impact of this on the mechanical response to be better understood.

--------------------------------------------------

Project Opportunities

Title: Degradation of cementation in soil element tests

Summary of opportunity:

The objective of the work will be to provide experimental data on the evolution (degradation) of cementation of artificially and naturally cemented geomaterials.

Opportunity synopsis:

This project will extend work performed in a recently completed PhD thesis. This will be achieved by monitoring the shear wave velocity as the materials are subjected to a range of stress paths. The rationale behind this approach is that the shear wave velocity is sensitive to the amount of cementation and provides a non-destructive measurement. The experimental data will allow an evaluation of the different strategies employed in constitutive models to reproduce the effects of cement degradation.

--------------------------------------------------

Project Opportunities

Title: Simple shear tests of clay

Summary of opportunity:

The project would involve carrying out a series of tests on clay specimens at a range of stress levels and for a number of stress histories.

Opportunity synopsis:

A new instrumented simple shear apparatus has been developed at the University of Sydney to try to resolve a long standing debate on the correct interpretation of direct and simple shear tests of clay. The instrumentation is critical to this exercise as without this assumptions are required to interpret the test responses. The project would involve carrying out a series of tests on clay specimens at a range of stress levels and for a number of stress histories.

RESEARCH PROJECTS & ACTIVITIES

  • PROJECT
    Next-Gen Free-Fall Penetrometer (Sydprobe MKIII) Development and Commercialisation for Rapid Submarine Soil Profiling
    Sydney Knowledge Hub1 Nov 2025
    Project leaders:
    • Airey D
    This project develops and translates a next-generation free-fall penetrometer (FFP) for rapid, low-cost characterisation of near-surface estuarine and submarine sediments to support coastal hazard assessment and the design of seabed infrastructure such as cables, pipelines, anchors, and shallow foundations. The Sydprobe MKIII development phase (Nov 2025 to Feb 2026) advances the existing MKII platform through modular hardware and streamlined sensing and interpretation workflows. From Feb 2026, the commercialisation phase focuses on industry engagement, stakeholder interviews and pilot deployments, plus the delivery of practical guidance that helps partner teams design field and research projects that generate usable data and real operational impact. Companion software is developed to convert sensor time-series into actionable soil classification and strength indicators, with an emphasis on minimal operator input and clear, engineer-ready outputs.
  • PROJECT
    Next-Gen Free-Fall Penetrometer (Sydprobe MKIII) Development and Commercialisation for Rapid Submarine Soil Profiling
    Sydney Knowledge Hub1 Nov 2025
    Project leaders:
    • Airey D
    This project develops and translates a next-generation free-fall penetrometer (FFP) for rapid, low-cost characterisation of near-surface estuarine and submarine sediments to support coastal hazard assessment and the design of seabed infrastructure such as cables, pipelines, anchors, and shallow foundations. The Sydprobe MKIII development phase (Nov 2025 to Feb 2026) advances the existing MKII platform through modular hardware and streamlined sensing and interpretation workflows. From Feb 2026, the commercialisation phase focuses on industry engagement, stakeholder interviews and pilot deployments, plus the delivery of practical guidance that helps partner teams design field and research projects that generate usable data and real operational impact. Companion software is developed to convert sensor time-series into actionable soil classification and strength indicators, with an emphasis on minimal operator input and clear, engineer-ready outputs.
  • PROJECT
    ChemBase Laboratory Testing Manual and Instructional Video Development for Stabilised Soils
    6 Mar 2025
    Project leaders:
    • Airey D
    This project delivers a standardised laboratory testing and training package for ChemBase stabilised soils, focusing on repeatable sample preparation, curing, and strength testing workflows. It consolidates step-by-step instructions, checklists, and calculation templates into a practical manual aligned with routine geotechnical lab practice, and produces companion instructional videos that demonstrate the full procedure and key quality-control checkpoints. The deliverables also include a high-quality, packaged plug-and-play software toolkit that streamlines data entry, calculations, and reporting, enabling consistent execution across operators and laboratories and improving traceability, comparability of results, and day-to-day usability.
  • PROJECT
    Dynamic separation and liquefaction risk in partially saturated bulk cargoes under ship-induced vibration
    1 Mar 2024
    Project leaders:
    • Airey D
    This project investigates how cyclic loading during maritime transport can trigger dynamic separation, densification, and excess pore pressure build-up in partially saturated granular cargoes (for example, sand–fines mixtures and mineral concentrates). Using controlled laboratory vibration and shaking experiments with pore pressure monitoring, we explore the roles of saturation, fines content, density, loading frequency, and acceleration on the onset and evolution of liquefaction-like behaviour. A calibrated one-dimensional hydro-mechanical model is used to interpret mechanisms and extrapolate laboratory findings to representative cargo conditions, supporting improved screening, risk assessment, and safer bulk cargo shipment practices.
  • RESEARCH-BASED DEGREE SUPERVISION
    A comparison between multi-turn and single-helix piles
  • RESEARCH-BASED DEGREE SUPERVISION
    Achieving sustainable outcomes through the reuse of deep foundations and retaining structures, with particular reference to the presence of imperfections and development of remedial solutions
  • RESEARCH-BASED DEGREE SUPERVISION
    AI-Driven Utilisation of Alkali-Activated Aluminosilicate Wastes for Sustainable Soil Stabilisation
  • RESEARCH-BASED DEGREE SUPERVISION
    Autogenous sealing in bentonite clay: experimental investigation and numerical modelling
  • RESEARCH-BASED DEGREE SUPERVISION
    Behaviour of Sandy Soils with Varying Fines Content and Saturation Under Monotonic and Cyclic Triaxial Loading: Experimental Study and Model Validation
  • RESEARCH-BASED DEGREE SUPERVISION
    Engineering Performance of Geosynthetic Clay Liners in Contact with Brine under High Temperature
  • RESEARCH-BASED DEGREE SUPERVISION
    Evaluating the Effectiveness of Rolling Dynamic Compaction Via Scaled Model and Numerical Simulation
  • RESEARCH-BASED DEGREE SUPERVISION
    Evaluation of stiffness-based approaches for assessing soil compaction in laboratory and field
  • RESEARCH-BASED DEGREE SUPERVISION
    Granular drag forces under dynamic loadings
  • RESEARCH-BASED DEGREE SUPERVISION
    Investigating the influence of the degree of saturation (Sr) and dry density (ρ) on Shear Modulus (G) of compacted fill.
  • RESEARCH-BASED DEGREE SUPERVISION
    Lightly Loaded Energy Farm Foundations in Cracked Desiccated Soils
  • RESEARCH-BASED DEGREE SUPERVISION
    Liquefaction Behaviour of Shipped Metallic Ores from a Soil Mechanics Perspective
  • RESEARCH-BASED DEGREE SUPERVISION
    Mechanics of healing and self-healing in clay soils
  • RESEARCH-BASED DEGREE SUPERVISION
    Microplastic Mobility and Retention in Geosynthetic Clay Liners
  • RESEARCH-BASED DEGREE SUPERVISION
    Moving granular materials efficiently
  • RESEARCH-BASED DEGREE SUPERVISION
    Process modelling of selective laser melting: Effects of powder bed quality and surface tension model
  • RESEARCH-BASED DEGREE SUPERVISION
    Resistance to Desiccation Cracking in Clay-Polymer Mixtures
  • RESEARCH-BASED DEGREE SUPERVISION
    Structural and Phase Transition in Wet Granular Media
  • RESEARCH-BASED DEGREE SUPERVISION
    The Effects of Initial State on the Cyclic Response of Sydney Sand
  • RESEARCH-BASED DEGREE SUPERVISION
    The mechanical behaviour of weak artificial rocks with bond degradation with application to CO2 geosequestration